fbpx

X-Sense Home Security System Review – MEGABYTEReviews

Table of Contents

The X-Sense Home Security kit is a quite economical safety body suited for much smaller flats, where you often don’t possess additional than 4 home windows and where the WiFi relationship may effortlessly meet all sections of your home. And that’s given that there is a perfectly developed foundation terminal (with an integrated electric battery to defend you coming from willful or unintentional electrical power blackouts) and all its own devices obtain hooked up to it wirelessly.

Yes, I understand that the supplier promotes 1.25 kilometers on the Spread Spectrum technology, however this stays to become assessed in a property with several dense cement wall surfaces (including my very own). I was actually a little pleasantly surprised to find that X-Sense made their 1st safety body, however I expect it was actually an in some way organic switch after they established a lot of WiFi smoke alarm.
At the exact same opportunity, this performs suggest that the body still possesses area to develop and brand-new components might still be actually incorporated (including the Amazon Alexa assistance which was actually incorporated later on) – I also like that you may also include smoke alarm to the body.

x-sense-home-security-system

It’s intriguing to find just how the DIY safety bodies market is thriving, therefore certainly there are some remarkable competitions coming from Abode and SimpliSafe, which are also in an identical rate brace. And this performs suggest that X-Sense has actually gotten into a relatively very competitive particular niche and it performs require to obtain it right the very first time, specifically considering that our company’re handling with tools that must make sure the safety of our residences. Without further confusion, allow’s place the X-Sense Home Security System to the exam and find whether they have actually gotten their spot as a trusted item of innovation.

The Design and Build Quality

There is a much more general version which possesses far fewer gps tools (pair of home window sensing units and one movement sensor), however the unit that I obtained had pair of extra access sensing units and another movement sensor. The center terminal is the exact same for each arrangements and it’s a relatively portable plastic situation (it gauges 5.1 x 3.2 x 3.2 ins or 12.9 x 8.2 x 8.2 centimeters) dealt with through a white colored matte surface. There are no pointy perspectives, every little thing is good and bent and, while the best fallen leaves area for the LED to sparkle through, I observed that near the bottom, there is an integrated platform with some void, so I was actually pondering what’s that everything about.

x-sense-home-security-system-internal

It seems to be that the supplier has actually installed the audio speaker therefore that it directs downwards and the foundation system possesses the function to magnify and relocate the noise sideways. And it’s loud. It may get to 105dB, therefore certainly, you’re going to hear it and therefore will your next-door neighbors. I also saw that there was what was similar to an audio speaker grill on the rear end side, over the USB-C adapter, so I believed to inspect what’s inside the situation.
I opened up the tool through eliminating the 4 screws under and I could possibly glide the best cover with simplicity. It seems to be that the abovementioned cut-outs are for air flow reasons and the audio speaker performs certainly rest near the bottom.

There are pair of aerials hooked up to the panel and the electric batteries are (incredibly) on top of the situation, beneath the LED lighting. On the face of the center terminal, there are pair of switches, a relatively major rectangle-shaped one that possesses the function of beginning the coupling method with the hub, to muteness a triggered alarm system or to switch the tool totally off (accomplishing this will also turn off the electric battery data backup). The various other switch is in a sunken job and its own function is to totally reset the tool to the nonpayment manufacturing facility setups. The top-placed LED will sparkle reddish if an alert has actually been actually caused, it will become fresh when the center terminal is in coupling setting and will become blue after an effective relationship to the WiFi. If the center terminal can’t attach to the hub WiFi, then the LED will be actually yellowish.

x-sense-led

The solitary LED with colours is certainly not truly the absolute most reputable body out certainly there, however then once more, reddish ways poor (alarm system) and blue ways every little thing is functioning great. So it type of make good sense. As gps tools, there’s the movement sensing unit which is electric battery powered and yes, you perform obtain the electric batteries in the package deal. The sensing unit is relatively major and it performs possess the pairing/test switch beneath the cover; you may put up the tool to the wall surface utilizing the delivered screws (or you may just use the delivered strips to adhesive it to the wall surface – helpful if you’re in a rentals). The access sensing unit is also electric battery worked and it contains pair of parts that are magnetic.

This opportunity, the coupling button is on the side and the electric battery area is beneath the brace. Design-practical the gps tools aren’t that special-looking and they shouldn’t. They’re covered by a white matte finish, so they’re not trying to attract anyone’s attention, but simply blend in with the wall.
Note: X-Sense also provides a small remote control which can be used to Arm, Disarm the alarm, let the system know you’re home or send an SOS signal.

The Installation

The first device that needs to be added to your WiFi network is the base station so go ahead and power it on – just connect it to a power source. Then, the LED should start flashing green; now is a good time to download and install the X-Sense Home Security app (works on both iOS and Android).

installation

You will have to create an account (it does require your email) and, after activating it, you should be able to start adding devices. First, select the Base and then, you will need to allow the app to access your camera in order to be able to scan the QR code from the bottom of the device. Afterwards, you will have to create a new Home and select the location of the base station. Lastly, select a 2.4GHz network (it will be detected by default) and wait until the base pairs to your router. It says that you should be in the range of the router, so it’s not necessary to be very near to it (in my case, it was about 30 feet away and it worked just fine). On the next step, you can add a motion detector and to do so, you do need to insert a battery and then head over to the app.

Here, press on the plus sign and select the Motion Sensor. The process is very similar to the base station, so you also need to scan the QR code and then press the Reset button until the LED starts flashing. It should now be connected to the base station and confirmed by the voice notification. You will need to go to a very similar process with the Entry Sensor, so go ahead and select it from the list, scan the QR code, add the battery and click the Reset switch until you see the LED flashing.

satellites

Then, wait for the voice confirmation and the sensor should appear in the app and it should show the accurate state (Open or Closed). We do also have a remote control and again, the process follows very similar steps: scan the QR code and this time, you will have to press the Arm and Disarm buttons at the same time until the LED starts flashing. Then it should quickly be added to the app – I noticed that my remote control had very little battery left, so I decided to change it. There is a single screw on the bottom – remove it to be able to change the CR2032 battery.

The App

The mobile application is very easy to use and understand which is a great plus for a company that (now) focuses on security. The main window shows the devices that you have paired to the app, including the base station and, each device will show its current status. This status can and will change in real-time (well, with a delay of a few seconds) depending on whether the sensors detect motion or if the magnetic pieces are opened (for the entry sensor).

x-sense-application

You can tap on any device to check more info and adjust some settings. For example, the Base Station will allow you to change the LED Brightness and the Voice Volume, as well as the Alarm Volume – you can select between three tones, but be aware that there will be a quick sound test at the end, so don’t get startled. The Entry sensors allow you to enable or disable the LED indicator and either keep them silent or add a sound when the alarm is triggered. This is great for letting the trespassers know that an alarm has been triggered and that it’s better to back off quickly.

The Motion Detection sensors can also have a Tone added to the speaker before the actual horn will be enabled. You can also enable or disable the LED and set the Sensitivity. If the area of interest is not very far, then a lower sensitivity is good, but, if you want to cover a far larger area, such as a long hallway, then you can raise the sensitivity. Lastly, you can run a Motion Test to get a better idea where and how to properly position the motion sensor.

x-sense-home

The app will also allow you to view the devices by rooms, you can select between the three available modes: Disarm, Home and Away or view the History (logs for when the alarm has been triggered). There is a new feature that has been recently added and that’s the support for Amazon Alexa which means that by linking to the Amazon account, you get to control the way the system will function using voice commands.

The Performance

I have been a part of the beta testers, so I saw the growing pains that were necessary to create the X-Sense Home Security, but I think the current state of the system is really balanced. I know that the app had some issues with the connection between the base station and the sensors, the range would sometimes be weirdly short and there were other hiccups, so I put every part of the system to the test. The first is the base and it seems that it has no issue with being far away from the router. As long as there’s a reliable connection to your WiFi, the base station LED will stay solid blue and properly communicate with your sensors.

As for the entry sensors, I have added a quick video that showcases just how reactive it is and yes, I was very close to the base station. I moved it way farther to see if the reaction time is just as fast (somewhere around one second). Four walls away (including a thicker load-bearing wall), it didn’t make any difference and not even the signal was affected. So the 1.25 mile range is very realistic – I couldn’t get the signal to drop even a single bar in a fairly old and fairly large concrete house, so that says a lot.

The motion detection sensors can be a bit of a pain is they’re installed incorrectly. Ideally, you should place the sensor about 6.5 feet above the floor either on the wall or in a corner (don’t put it at a weird angle, just make sure it faces the area you’re interested in). Additionally, be aware that both the sun and a fireplace can interfere with the accuracy of the sensor. In my tests, keeping the sensitivity to the lowest level (1), the alarm would trigger if I was moving at about 6.5 feet in front of the device (2 meters). The sensitivity gets even better the higher you set the level. So yes, the last couple of weeks of testing revealed that the base station does not randomly disconnect from the router and the sensors all worked as intended which is great.

x-sense-home-sensor

But, I was curious about the frequency at which the devices inter-connect. While X-Sense did not disclose the frequency range that it uses for the connection between the secondary devices to the base station, I did find that they do rely on the ASR6505 LoRa Front End Module chip which supports a frequency between 150 and 960MHz. So I can’t be sure whether they use the dreaded 433.92MHz frequency which, as the LockPickingLawyer from YouTube said, it’s incredibly easy to interfere with. And no, there is no interference detection built into the system which would have been a nice, if not kind of a mandatory feature to have.

The Conclusion

The X-Sense Home security system is not a high-end feature-packed system that supports a Cloud connection and has a subscription, but it is a fairly simple, yet very much functional security system suitable for a smaller home. Especially if you’re paying rent since you don’t need to drill any holes to have everything set up. In my tests, everything worked perfectly, the app would quickly detect any changes and the sensors were very reactive and had a good range. Like I said, it’s fairly bare-bones, but very easy to use (yes, the manufacturer had just added support for Amazon Alexa, which can be seen as a plus), so, for the price tag, it’s definitely worth checking out.

X-Sense Home

X-Sense Home

Pros

  • Good connection between the base and the sensors
  • The app is reactive
  • Very easy to set up
  • Support for Amazon Alexa

Cons

  • The motion sensors may not be very compact
  • Doesn’t have interference detection

logo

Mark is a graduate in Computer Science, having gathered valuable experience over the years working in IT as a programmer. Mark is also the main tech writer for MBReviews.com, covering certainly not only his passion, the networking devices, however also various other cool electronic gadgets that you may locate helpful for your everyday life.


Source link

Leave a Reply

Your email address will not be published. Required fields are marked *